Differences

This shows you the differences between two versions of the page.

--- insert_peak_hkl [2024/06/22 06:57] – johnsoevans
+++ insert_peak_hkl [2024/06/22 07:00] (current) – johnsoevans
@@ Line 1: / Line 1: @@
-====== Insert a peak fixed by hkl ======
+====== Insert a peak at position fixed by hkl ======
 The macro below lets you insert freely-refined peaks at values determined by h,k,l of a specified unit cell.  It's only written for orthorhombic, tetragonal or cubic systems, but you could modify the dsp equation for other systems.  It uses a single overall lorentzian mixing.  You can optionally restrain the intensity to known values.  Enter 0 and penweight 0 if you don't want to do this.
@@ Line 5: / Line 5: @@
 <code topas>
 xdd ....
-prm lpap 7.12
+prm lpap 10.598
-prm lpbp 8.13
+prm lpbp 10.598
-prm lpcp 9.25
+prm lpcp 10.598
 prm lor  0.984351773`_0.00788793893 min 0 max 1 'use a single overall lorentzian mixing, you could do this per peak
 prm !penweight 1 'change to 1 and the refined intensity is restrained to some ideal value
 prm !fwhm_max 0.8 'use this to reset fwhm if needed
+Peak_hkl(   2,  0,  0,  6,         0.06, 16.7166832`_3.56628528e-05, @, 0.0778591013`_0.0248680646, @, 0.0708756377`_0.00970465715)
+Peak_hkl(   2,  1,  1, 24,         4.18, 20.5104712`_4.39171268e-05, @, 0.0587888733`_0.00123729557, @, 4.24569394`_0.0341241639)
 </code>